PRODUCTS
Location：Home > PRODUCTS > Colors Measurement Series > Spectrophotometer > Spectrophotometer CM-2300d
Spectrophotometer CM-2300d
CM-2300d is a portable integrating sphere spectrophotometer. The multi-function can be put into use in various areas.
·Portable, rugged, light and stylish case
·Storage maximum 1700 sets data
·High-precise detector
·Compatible with the data of CM-2600d (Ø8) and CM-2500d
Illuminating/viewing system | d/8 (diffuse illumination, 8-degree viewing angle), equipped with simultaneous measurement (not switched mechanically) of SCI (specular component included)/ SCE (specular component excluded). (Conforms to CIE No.15, ISO 7724/1, ASTM E1164, DIN 5033 Teil7, JIS Z8722 Condition c, standard.) |
Size of integrating sphere | Ø 52 mm |
Detector | Silicon photodiode array (dual 40 elements) |
Spectral separation device | Diffraction grating |
Wavelength range | 360 nm to 740 nm |
Wavelength pitch | 10 nm |
Half bandwidth | Approx.10 nm |
Reflectance range | 0 to 175%, Display resolution: 0.01% |
Light source | 2 pulsed xenon lamps |
Measurement time | Approx. 1.5 seconds |
Minimum measurement interval | 3 seconds (at 23 ℃ ) |
Battery performance | Approx. 1000 times at 10-second intervals (when alkaline batteries used)(at 23 ℃ ) |
Measurement/illumination area | Ø 8 mm/ Ø11 mm |
Repeatability | Spectral Reflectance: Standard deviation within 0.2% (360 to 380 nm: Standard deviation within 0.4%)Chromaticity Value: Standard deviation ΔE*ab within 0.08 (When a white Calibration Plate is measured with mater body at 23 ℃ ) |
Inter instrument agreement | ΔE*ab within 0.4 (SCI) (Based on the average of 12 BCRA series II color tiles, compared to value measured with master bady at 23 ℃ ) |
Language modes | English / Chinese |
Measurement moder | Single/ averaging (auto made: 1 to 8 times/ manual mode) |
Interface | Conforms to RS-232C |
Observer | 2/10 degrees |
Observation illuminat | A, C, D 50 , D 65 , F2, F6, F7, F8, F10, F11, F12 (simultaneous evaluation is possible using two illuminant) |
Display | Spectral value/ graph, colorimetric value, color difference value, PASS/ FAIL result, relative gloss value |
Color space/colorimetric data | L*a*b*, L*C*h, Yxy, XYZ, MI, ΔE*ab, CMC （ 1 ： 1 ） , CMC （ 2 ： 1 ） , CIE94, CIE DE2000, WI(ASTM E313), YI(ASTM D1925) |
Storable data sets | 1,700 (each SCI/SCE pair constitutes a single data set) |
Tolerance judgment | Tolerance for color difference (1 set of tolerances can be set) |
Power | AA-size battery (x4), AC adapter |
Size | 69(W)X96(H)X193(D)mm |
Weight | Approx.670g (including “Measuring Base”/ excluding batteries) |
Operating temperature/humidity range | 5 ℃ to 40 ℃ , relative humidity 80% or less (at 35 ℃ ) with no condensation |
Storage temperature/humidity range | 0 ℃ to 45 ℃ , relative humidity 80% or less (at 35 ℃ ) with no condensation |
Standard accessories | White Calibration Plate: CM-A145 |
Target mark Ø 8 mm: CM-A146 | |
RS-232C cable (D-sub 9-pin, for IBM,PC/AT) ： IF-A16 | |
AC adapter AC-A17 | |
AA (R6) Alkaline battery X 4 | |
Optional accessories | Zero Calibration Box: CM-A32 |
Hard Case: CM-A148 | |
Dust Cover Set: CM-A149 | |
Dust Cover: CM-A152 | |
Color Data Software “SpectraMagic NX”: CM-S100W | |
Printer cable (D-sub 9-pin, for serial connection): CR-A75 |
