PRODUCTS

Location：Home > PRODUCTS > Force-measuring instrument ser > Liquid Dispenser Equipment > Automatic numerical control dispensing machine sp8000

Automatic numerical control dispensing machine sp8000

Model：SP8000
Brand：

Power supply: AC 220V ± 10% / 50Hz

AC 110V ± 10% / 60Hz (internal conversion possible)

Power consumption: < 12W

Air source: maximum 0.99mpa (clean dry air without lubrication)

Discharge pressure adjustment range: 0.05Mpa -- 0.99mpa

Function mode: manual mode and 16 free setting modes

Spit out time adjustment: automatic timing spit out two groups of 0.01s-99.99s/0.001s-9.999s

Spit out time display: four digit LED display, and the spit out amount can be adjusted at will

Adjustment of spitting interval: 0.1-9.9s

Vacuum back suction function: adjustable negative pressure control to 600 mm Hg

Repetition accuracy and ejection frequency: accuracy: + 0.01% frequency: > 800 times / min

Minimum spitting volume: 0.0001ml

Overall dimension: 235mmx225mmx63mm

Weight: < 3kg


The code pulling switch of the setup four digit spit out time programmer located on the back can be pulled to select 16 spit out modes first.


The mode settings are as follows:


Mode switch status
Spit out mode and work corresponding function

S1

S2
S3
S4

F1


OFF

OFF


OFF


OFF

Step on the foot switch and keep spitting out: release to stop spitting out.
F2
ON
OFF
ON
ON
Step on the foot switch once and continue to spit out according to the set time: step on it again to stop spitting out.
F3
OFF
ON
ON
ON
Step on the foot switch and continue to spit out according to the set time: step on and stop spitting out.
F4
ON
ON
ON
ON
Automatically spit out continuously at a fixed time, step on the switch, release the switch and continue.
F5
ON
OFF
OFF
OFF
Step on the foot switch and spit it out once according to the set time.
F6
OFF
ON
OFF
OFF
Step on the foot switch and spit it out twice according to the set time.
F7
ON
ON
OFF
OFF
Step on the foot switch and spit out three times according to the set time.
F8
OFF
OFF
ON
OFF
Step on the foot switch and spit out four times according to the set time.
F9
ON
OFF
ON
OFF
Step on the foot switch and spit out five times according to the set time.
F10
OFF
ON
ON
OFF
Step on the foot switch and spit out six times according to the set time.
F11
ON
ON
ON
OFF
Step on the foot switch and spit out seven times according to the set time.
F12
OFF
OFF
OFF
ON
Step on the foot switch and spit out eight times according to the set time.
F13
ON
OFF
OFF
ON
Step on the foot switch and spit out nine times according to the set time.
F14
OFF
ON
OFF
ON
Step on the foot switch and spit out ten times according to the set time.
F15
ON
ON
OFF
ON
Step on the foot switch and spit out eleven times according to the set time.
F16
OFF
OFF
ON
ON
 It can solve many glue dropping problems. It is simple to use, fast and easy to use. It is equipped with vacuum suction function, which can control liquids with different viscosities to prevent leakage. It has high efficiency and consistent glue output. It is not easy to fatigue, no waste, widely used, and the products are complete. According to the needs of users, it can be equipped with different kinds of needle cylinders and needle nozzles. It is the best partner of users.

ADD：8 / F, east of building 4, SEG Science Park, Huaqiang North Road, Shenzhen

Phone：+86-18682214126（Mona）   TEL：+86-0755-82799916

E-mail：tony@stony.cn   FAX：+86-0755-82799953

@2006-2024   All Rights Reserved